Hi again Olivier.olivierg wrote: ↑Wed Feb 24, 2021 5:43 pm 1) Yes, but without the adapter that you used as an example.
2) No, in schematic 2 chips: 1 for charging battery and another for convert 3.7v to 5V (DC-DC).
3) Because you can not send 5V from USB to PSION, not good idea.
And you did not understand yet, that the CL is not permanently powered. If you exit the term menu for example it is off and you lose the connection with the BT module.
You don't have to worry about the battery and the module, they will be included and soldered in the version I am developing.
Unless you do it yourself, but it takes some knowledge of electronics and it will be wonky.
You typed "And you did not understand yet, that the CL is not permanently powered. If you exit the term menu for example it is off and you lose the connection with the BT module."
I have understood this Olivier.
But if we power the CL with 5V from an external battery in parallel with Psion, when we exit the term we will still have power from the external battery and we will not lose the connection.Am I right?
I am waiting for the comms link you are going to produce.
Especially for the new cover.
But I have to make some comms for communication with other devices except the PC.
That is why I ask so many questions to you.